Folbot Yukon

Moderators: mje, krudave

Post Reply
john allsop
Brotherhood of the Golden Paddle
Posts: 1180
Joined: Mon Apr 18, 2005 3:40 pm
Location: isles of scilly UK

Folbot Yukon

Post by john allsop »

Members might be interested in my Yukon with a 1.4 Kayaksailor sail. I have cut off the long tube sticking out from the bow. The photo was taken when I lived in Northern Ontario. Here is another photo taken at the same time showing the lee boards.
You do not have the required permissions to view the files attached to this post.
Last edited by john allsop on Tue Nov 20, 2018 9:18 am, edited 1 time in total.

RangerTim
faltbootemeister
Posts: 180
Joined: Sun Jan 11, 2015 4:10 pm

Re: Folbot Yukon

Post by RangerTim »

Interesting that akas and amas are aft. I presume leeboard is aft as well. The typical Balogh installation has the akas next to the mast. Does this aft arrangement work well for you?
Ann and me
Folbots: Too many. It's embarrassing.
Feathercraft: Aeronaut
Klepper: AEI - Jonathan Waterman's boat
Hardshells x6

john allsop
Brotherhood of the Golden Paddle
Posts: 1180
Joined: Mon Apr 18, 2005 3:40 pm
Location: isles of scilly UK

Re: Folbot Yukon

Post by john allsop »

I put the outriggers at the back because I coudn,t put them where the sail is, in fact they were not really needed. The kayaksailor lee boards are at the sail location as they are part of the assembly. I have also used a Klepper S1 sail on the Yukon and a Pacific Action sail, of course not together. I have added a second photo.

Post Reply

Return to “Folbots”