kayak hull material

Moderators: chrstjrn, krudave

User avatar
gbellware
lord high faltbotmeister
Posts: 891
Joined: Thu Sep 06, 2007 8:05 am
Location: atlanta, georgia

Re: kayak hull material

Post by gbellware »

+1 overland.

Alv, thanks for your generous contributions. It is rare to have someone share the level of details on their own proprietary products, and I think that kind of "open sourcing" will, hopefully, keep you at the head of this class.

Best,
g
"There is nothing--absolutely nothing--half so much worth doing as simply messing around in boats"

1988 A1 Expedition
2010 carbon Klepper Quattro
BSD sail rig, 24' mizzen + 36' main
39' jib
Torqeedo outboard
1938 Sachs-Fichtel seitenbordmotor

RainerM
forum fanatic
Posts: 86
Joined: Fri Sep 19, 2014 4:36 pm
Location: Germany

Re: kayak hull material

Post by RainerM »

overland wrote:Can the material above be sewn on a home sewing machine, or is an industrial sized machine necessary?
Sewing with a home sewing machine is not funny. I use and need different machines...old but good.
Pfaff 130 = home sewing machine with ZZ stitch (~1950)
Adler 67/73 = industrial sized machine (triple transport sewing machine, ~1950))
Dürkopp (ex Volkswagen) = industrial sized machine (Needle feed sewing machine = double transport sewing machine, ~1960)

R.
You do not have the required permissions to view the files attached to this post.

arcprof
forum fanatic
Posts: 53
Joined: Tue Dec 03, 2013 10:56 pm
Location: Auckland New Zealand

Re: kayak hull material

Post by arcprof »

I only have domestic sewing machines. My Elnas are sturdy, mechanical types from the 60s. They will sew through canvas deck, piping trim and heavy weight hypalon but as Rainer says I'm not smiling as I sew. The feed is the issue with so much weight in the hull. A roller foot helps and I've used all manner of "aids" to transport the hull through the machine. These include a child's stroller and mechanics crawler so the folded up hull moves on wheels as it approaches the machine.
My latest technique with a new PVC hull is based on sewing a 30mm wide strip of hull material to the canvas deck and gluing the hull to the strip using a heat sensitive contact glue. This still involves thinking outside the square but simplfies the sewing from extremely challenging to straight forward.

Check out:
viewtopic.php?f=36&t=6051

Cheers Jim
Folbot:Super, Sporty, Greenland II, Klepper:1960's AE2, 1970's AE2, 1990's AE2000

overland
faltbootemeister
Posts: 122
Joined: Mon Feb 15, 2016 4:17 pm
Location: Chicago

Re: kayak hull material

Post by overland »

Bought 7 yards of 22 oz. of Pvc yesterday. (It was pretty cheap--about $50.) It feels quite tough and substantial. It's slightly unbalanced--one side has a little more coating than the other, but not by a lot. Wish it were more. It's fairly wide and I suppose I can use the extra fabric for wear strips. Our cheap home sewing machine is able to sew this material okay. I'm guessing I should glue the seam on either end of the hull and not try to sew them.

Post Reply

Return to “Kayak Repair”